• Recommended

  You can add up to 6 items per a category to the compare list. Compare

  

  

  MiSUMi Economy

  Single Axis Actuators KS86 Standard/KSC86 With Cover

  MiSUMi Economy

  MISUMI

  The product does not come with a motor, driver and cable for signal, which must be purchased separately. 3D data on the web page is revised on the basis of 2D drawings contained in the basic information, and the revision of 3D data is estimated to finish by the end of March.

  • Volume Discount

  CAD ：

  2D / 3D

  

  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more
• Recommended

  You can add up to 6 items per a category to the compare list. Compare

  

  

  MiSUMi Economy

  Single Axis Actuators KS60 Standard/KSC60 With Cover

  MiSUMi Economy

  MISUMI

  The product does not come with a motor, driver and cable for signal, which must be purchased separately. 3D data on the web page is revised on the basis of 2D drawings contained in the basic information, and the revision of 3D data is estimated to finish by the end of March.

  • Volume Discount

  CAD ：

  2D / 3D

  

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Single Axis Actuators LX30 Standard / Cover Type

  MISUMI

  MISUMI Single Axis Actuators LX30 Standard/Cover Type are high-precision linear motion devices tailored for diverse industrial and automation applications, known for their robustness and flexibility.Key Features:Motor Mounting Orientation: Straight, for flexible installation.Main Body and Components: The main body provided, with customer-installed motors.Ball Screw Shaft: 10 mm diameter with a rolled ball screw drive for smooth, accurate movement.Slider Material: Chrome molybdenum steel for strength and durability.Durable Construction: Designed to withstand rigorous industrial environments.High Precision: Ensures accurate positioning for critical applications.Customizable Setup: Adaptable to a variety of industrial setups and requirements​​.Ideal for tasks requiring precise, controlled linear movement, these actuators are a robust choice for industrial machinery and automation systems.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 16 Day(s) or more

  16 Day(s) or more
• Economy series

  You can add up to 6 items per a category to the compare list. Compare

  

  MiSUMi Economy

  Single Axis Actuators KS40 Standard/KSC40 With Cover

  MiSUMi Economy

  MISUMI

  The product does not come with a motor, driver and cable for signal, which must be purchased separately. 3D data on the web page is revised on the basis of 2D drawings contained in the basic information, and the revision of 3D data is estimated to finish by the end of March.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more
• Economy series

  You can add up to 6 items per a category to the compare list. Compare

  

  MiSUMi Economy

  Single Axis Actuators KS50 Standard/KSC50 With Cover

  MiSUMi Economy

  MISUMI

  The product does not come with a motor, driver and cable for signal, which must be purchased separately. 3D data on the web page is revised on the basis of 2D drawings contained in the basic information, and the revision of 3D data is estimated to finish by the end of March.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Actuators LX30 Motor Folded Type

  MISUMI

  The MISUMI Single Axis Actuators LX30 Motor Folded Type are designed for high-precision linear motion, suitable for various industrial and automation applications. These actuators are known for their compact design and adaptability.Key Features:Actuator Type: Linear axis actuator with cover, offering protection and enhanced durability.Motor Mounting: Folded type motor mounting for space efficiency.Dimensions: Short actuator length for compact applications.Pulley Diameter Options: Available with no attachment, pulley inner diameter options of Ø6 and Ø8.Size and Capacity: Designed to accommodate specific size and weight requirements, ensuring suitability for various applications.Ideal for tasks requiring precise and controlled linear movement, these actuators are a robust choice for industrial machinery and automation systems.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 21 Day(s)

  21 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Single Axis Actuators LX26 Standard / Cover Type

  MISUMI

  MISUMI's Single Axis Actuators LX26 Standard/Cover Type are high-precision linear motion devices suitable for a wide range of industrial and automation applications. These actuators are designed for flexibility and efficiency.Key Features:Motor Mounting Orientation: Straight, allowing for versatile installation options. Main Body and Components: Main body provided, with motors to be installed by the customer. Table Length: 47.4 mm, offering a compact and efficient working area. Ball Screw Shaft: Diameter of 8 mm with a rolled ball screw drive method for precise movement. Slider Material: Constructed from chrome molybdenum steel, ensuring strength and longevity. Surface Treatment: Slider treated with low-temperature black chrome for enhanced durability. Operating Temperature: Capable of operating in ambient temperatures ranging from 0°C to 50°C​​.Designed for both robustness and precision, these actuators are ideal for applications that require reliable and controlled linear movement, enhancing productivity and operational efficiency.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 16 Day(s) or more

  16 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Single Axis Actuators LX45 Standard / Cover Type

  MISUMI

  The MISUMI Single Axis Actuators LX45 Standard/Cover Type are designed for high-precision linear motion in a variety of industrial and automation applications. These actuators are recognized for their robust construction and high functionality.Key Features:Motor Mounting Orientation: Straight, allowing for versatile installation options.Main Body and Components: The main body is the primary component, with motors to be installed by the customer.Drive Method: Features a rolled ball screw for smooth and precise motion.Slider Material: Made from chrome molybdenum steel, ensuring strength and durability in demanding applications.Additional Specifications: Detailed specifications include a standard length of 1 pc, a cover provided, and various other dimensions and features.Ideal for tasks requiring precise, controlled linear movement, these actuators are a robust choice for industrial machinery and automation systems.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 16 Day(s) or more

  16 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Single Axis Actuators LX20 Standard / Cover Type

  MISUMI

  The MISUMI Single Axis Actuators LX20 Standard/Cover Type are precision linear motion devices designed for various industrial and automation applications, notable for their robust construction and customizable options.Key Features:Motor Mounting Orientation: Straight orientation.Main Body and Components: Main body as the primary component; motors installed by customers.Table Length: 33.2 mm, compact yet effective working area.Ball Screw Shaft: Diameter of 6 mm with rolled ball screw drive method.Slider Material: Chrome molybdenum steel for strength and durability.Surface Treatment: Low-temperature black chrome treatment for resilience.Operating Temperature: Effective operation in temperatures from 0°C to 50°C.These actuators are ideal for applications requiring precise, controlled linear movement, and their durable construction makes them suitable for both industrial machinery and automation systems.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 16 Day(s) or more

  16 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Single Axis Actuators LX15 Standard / Cover Type

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 16 Day(s) or more

  16 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Actuators LX45 Motor Folded Type

  MISUMI

  ■ Features· MISUMI Products: High accuracy, high rigidity, compact LX, low-cost LS, KU that's ideal for high accuracy and high load capacity. You can select LX with motor (servo motor, stepper motor) or without motor. Fast delivery and low price even on a large order.  

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 21 Day(s)

  21 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Actuators LS12 [C-Value - Driven by Ball Screw]

  MISUMI

  Single Axis Actuators enabling medium accuracy level transferring/positioning operations economically.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Actuator KR30H

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR30H

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table. Therefore, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator SKR33

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Actuator KR45H

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Actuator KR26

  THK

  An actuator with a compact and high-stiffness structure that integrates an LM guide, ball screw, and support unit, making it ideal for high-precision positioning.[Features]・ In addition to the standard specifications, the manufacturer will semi-order 5 highly requested customs, and will promptly procure and ship after ordering.[5 custom made]・ Dowel holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products.・ Positioning Metal Bolt: Install the positioning metal bolts for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor.・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover.・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance.・ AFF grease for clean environment: Encloses clean environment-friendly grease (THK, AFF grease) to suppress dust generation.[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Actuators LS10 [C-Value - Driven by Ball Screw]

  MISUMI

  Single Axis Actuators enabling medium accuracy transferring/positioning operations economically.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Robot KK60 Type (Mounting Surface Height: 33, Width: 60)

  HIWIN

  · The HIWIN KK-type single axis robot uses a modular design that unifies ball screws and linear guide ways.· Simple to mount in confined spaces.· Uses a high precision ball screw transmission mechanism, and has a U-rail as a guide mechanism. These systems ensure precision and rigidity.

  CAD ：

  2D / 3D

  From: 16,213,441 VND
  Days to Ship: Số ngày giao hàng: 55 Day(s) or more

  55 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Actuator Unit (Opening and Closing Type) (MAU5040SW)

  IMAO CORPORATION

  The main body combines stable sliding with T-grooves on three faces for easy mounting, achieving the optimal cross-section shape with maximum strength. The slide mechanism uses materials with excellent abrasion resistance and self-lubrication, and is usable long-term for loads from top, bottom, left, and right.

  CAD ：

  2D

  From: 11,524,623 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR15

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table. Therefore, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Robot KK86 Type (Mounting Surface Height: 46, Width: 86)

  HIWIN

  · The HIWIN KK-type single axis robot uses a modular design that unifies ball screws and linear guide ways.· Simple to mount in confined spaces.· Uses a high precision ball screw transmission mechanism, and has a U-rail as a guide mechanism. These systems ensure precision and rigidity.

  CAD ：

  2D / 3D

  From: 21,146,653 VND
  Days to Ship: Số ngày giao hàng: 56 Day(s) or more

  56 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Quick Delivery Actuator SKR26

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR46

  THK

  A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 20 Day(s) or more

  20 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Actuators LST10 [C-Value - Driven by Belt]

  MISUMI

  Belt-driven Single Axis Actuators enabling long stroke- /fast speed-transferring/positioning operations economically.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR45H

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, since the housing A/B doubles as a support unit, and the inner block doubles as a table, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Robot KK50 Type (Mounting Surface Height: 26, Width: 50)

  HIWIN

  · The HIWIN KK-type single axis robot uses a modular design that unifies ball screws and linear guide ways.· Simple to mount in confined spaces.· Uses a high precision ball screw transmission mechanism, and has a U-rail as a guide mechanism. These systems ensure precision and rigidity.

  CAD ：

  2D / 3D

  From: 13,500,265 VND
  Days to Ship: Số ngày giao hàng: 81 Day(s) or more

  81 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR26

  THK

  A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cable for Mitsubishi Electric/Encoder Cable

  MISUMI

  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Compact Series SKR20

  THK

  A compact, high-rigidity and high-precision actuator with an integrated inner block consisting of an LM block and ball screw nut.In addition, as the housing A/B serves as a support unit and the inner block serves as a table, it is possible to dramatically reduce the steps in designing and assembling.[Features] · Arranged to make contact at an angle of 45° such that the load is equal in 4 directions, enabling use in various positions. · The linear guide is made of 4 rows of circular arced grooves for a highly rigid guide with no cracks. · Changes to friction resistance due to changes in load are suppressed as far as possible, promoting high-accuracy feeding. · The U-shaped cross-sectional outer rail improves rigidity against moment and torsion.[Effects of Using Ball Retainer] · The grease retention capacity has been improved, allowing long-term maintenance-free operation. (QZ Lubricator is attached to the ball screw.) · Eliminates mutual friction between balls, reduces torque fluctuation and achieves excellent sliding performance. · In addition, since the basic dynamic load rating of the LM guide and ball screw is higher than conventional products, it has a long service life.

  CAD ：

  2D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator SKR33

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table. Therefore, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.[Effect of adopting ball retainer]·Due to the improved grease holding capacity, long-term maintenance-free operation has been achieved. (Lubricator QZ is attached to the ball screw section)・ Excellent sliding performance can be obtained due to elimination of mutual friction between balls and reduced torque fluctuation.・ In addition, the basic dynamic load rating of the LM guide and ball thread section is larger than before, so it has a long lifespan.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR33

  THK

  A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 20 Day(s) or more

  20 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Adapter Centering Tools for LX30 Actuator

  MISUMI

  This jig is used to align the axis of the motor attachment. For LX30 series.

  CAD ：

  2D / 3D

  From: 404,848 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator SKR20

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Quick Actuator KR20

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR20

  THK

  A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Actuator Unit (MAU5040SS)

  IMAO CORPORATION

  The main body combines stable sliding with T-grooves on three faces for easy mounting, achieving the optimal cross-section shape with maximum strength. The slide mechanism uses materials with excellent abrasion resistance and self-lubrication, and is usable long-term for loads from top, bottom, left, and right.

  CAD ：

  2D

  From: 7,158,570 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator SKR26

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, since the housing A/B doubles as a support unit, and the inner block doubles as a table, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.[Effect of adopting ball retainer]·Due to the improved grease holding capacity, long-term maintenance-free operation has been achieved. (Lubricator QZ is attached to the ball screw section)・ Excellent sliding performance can be obtained due to elimination of mutual friction between balls and reduced torque fluctuation.・ In addition, the basic dynamic load rating of the LM guide and ball thread section is larger than before, so it has a long lifespan.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cable for Mitsubishi Electric/Motor Power/Brake Cable

  MISUMI

  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Adapter Centering Tools for LX26 Actuator

  MISUMI

  This jig is used to align the axis of the motor attachment. For LX26 series.

  CAD ：

  2D / 3D

  From: 404,848 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Rack and Pinion System, L Series

  ORIENTAL MOTOR

  The Rack and Pinion System L-Series enables compact, high-power linear transport.The absolute system with hybrid control system AlphaStep AZ Series allows easy origin setting and origin return.

  From: 28,555,565 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s)

  19 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Adapter Centering Tools for LX45 Actuator

  MISUMI

  This jig is used to align the axis of the motor attachment. For LX45 series.

  CAD ：

  2D / 3D

  From: 404,848 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Adapter Centering Tools for LX20 Actuator

  MISUMI

  This is a jig used for aligning the shaft of the motor attachment.For the LX20 series.

  CAD ：

  2D / 3D

  From: 404,848 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Medium Accuracy] Motor Bracket Mounting Fixtures for Single Axis Actuators LST10

  MISUMI

  This is a special jig for aligning the axis when attaching the motor bracket to LST10.

  CAD ：

  2D / 3D

  From: 693,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sensor Set (NPN)

  ORIENTAL MOTOR

  Product specifications, product photos, and product catalogs, etc., are currently being finalized.

  From: 3,623,936 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s)

  14 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Nominal (Height)
Accuracy
Lead(mm)
Table
Motor Mounting Orientation
Main Body, Peripheral Components
Cover
With or w/o Motors
Table Length L1(mm)
Grease
Ball Screw Shaft Dia.(Ø)
With or w/o Lubricant Unit
Table Width W1(mm)
Amplifier Voltage
With or w/o Retainer

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	THK	THK	THK	THK	THK	MISUMI	HIWIN	IMAO CORPORATION	THK	HIWIN	THK	THK	MISUMI	THK	HIWIN	THK	MISUMI	THK	THK	THK	MISUMI	THK	THK	THK	IMAO CORPORATION	THK	MISUMI	MISUMI	ORIENTAL MOTOR	MISUMI	MISUMI	MISUMI	ORIENTAL MOTOR
Product SeriesDòng sản phẩm	Single Axis Actuators KS86 Standard/KSC86 With Cover	Single Axis Actuators KS60 Standard/KSC60 With Cover	Single Axis Actuators LX30 Standard / Cover Type	Single Axis Actuators KS40 Standard/KSC40 With Cover	Single Axis Actuators KS50 Standard/KSC50 With Cover	Single Axis Actuators LX30 Motor Folded Type	Single Axis Actuators LX26 Standard / Cover Type	Single Axis Actuators LX45 Standard / Cover Type	Single Axis Actuators LX20 Standard / Cover Type	Single Axis Actuators LX15 Standard / Cover Type	Single Axis Actuators LX45 Motor Folded Type	Single Axis Actuators LS12 [C-Value - Driven by Ball Screw]	Actuator KR30H	Actuator KR30H	Actuator SKR33	Actuator KR45H	Actuator KR26	Single Axis Actuators LS10 [C-Value - Driven by Ball Screw]	Single Axis Robot KK60 Type (Mounting Surface Height: 33, Width: 60)	Actuator Unit (Opening and Closing Type) (MAU5040SW)	Actuator KR15	Single Axis Robot KK86 Type (Mounting Surface Height: 46, Width: 86)	Quick Delivery Actuator SKR26	Actuator KR46	Single Axis Actuators LST10 [C-Value - Driven by Belt]	Actuator KR45H	Single Axis Robot KK50 Type (Mounting Surface Height: 26, Width: 50)	Actuator KR26	Cable for Mitsubishi Electric/Encoder Cable	Compact Series SKR20	Actuator SKR33	Actuator KR33	Motor Adapter Centering Tools for LX30 Actuator	Actuator SKR20	Quick Actuator KR20	Actuator KR20	Actuator Unit (MAU5040SS)	Actuator SKR26	Cable for Mitsubishi Electric/Motor Power/Brake Cable	Motor Adapter Centering Tools for LX26 Actuator	Rack and Pinion System, L Series	Motor Adapter Centering Tools for LX45 Actuator	Motor Adapter Centering Tools for LX20 Actuator	[Medium Accuracy] Motor Bracket Mounting Fixtures for Single Axis Actuators LST10	Sensor Set (NPN)
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D		2D / 3D		2D / 3D	2D / 3D	2D / 3D
From																			16,213,441 VND	11,524,623 VND		21,146,653 VND					13,500,265 VND						404,848 VND				7,158,570 VND			404,848 VND	28,555,565 VND	404,848 VND	404,848 VND	693,000 VND	3,623,936 VND
Days to ShipSố ngày giao hàng	5 Day(s) or more	Same day or more	16 Day(s) or more	Same day or more	Same day or more	21 Day(s)	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	21 Day(s)	12 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	12 Day(s) or more	55 Day(s) or more	12 Day(s) or more	23 Day(s) or more	56 Day(s) or more	23 Day(s) or more	20 Day(s) or more	12 Day(s) or more	23 Day(s) or more	81 Day(s) or more	23 Day(s) or more	5 Day(s) or more	23 Day(s) or more	23 Day(s) or more	20 Day(s) or more	4 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	12 Day(s)	23 Day(s) or more	5 Day(s) or more	4 Day(s) or more	19 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	14 Day(s)
SpecificationsĐặc điểm kĩ thuật
Nominal (Height)	68 / 46	48 / 33	30 / 40	32 / 20	26 / 40	30 / 40	26 / 33	45 / 57	20 / 27	15 / 21	45 / 57	-	30	30	33	45	26	-	33	58	15	46	26	46	-	45	26	26	-	20	33	33	-	20	20	20	58	26	-	-	-	-	-	-	-
Accuracy	Standard Grade	Standard Grade	High Grade / Precision Grade	Standard Grade	Standard Grade	High Grade	High Grade / Precision Grade	High Grade / Precision Grade	High Grade / Precision Grade	High Grade / Precision Grade	High Grade	Standard Grade	Standard Grade	Standard Grade / High Grade / Precision Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	-	High Grade / Precision Grade	Standard Grade	Standard Grade	Standard Grade / High Grade / Precision Grade	Standard Grade	Standard Grade / High Grade / Precision Grade	Standard Grade	Standard Grade / High Grade / Precision Grade	-	Standard Grade / High Grade / Precision Grade	Standard Grade / High Grade / Precision Grade	Standard Grade / High Grade / Precision Grade	-	Standard Grade	Standard Grade	Standard Grade / High Grade / Precision Grade	-	Standard Grade / High Grade / Precision Grade	-	-	-	-	-	-	-
Lead(mm)	10 ～ 20	5 ～ 10	5 ～ 10	1 ～ 6	2 ～ 10	5 ～ 10	2 ～ 10	10 ～ 20	1 ～ 5	2	10 ～ 20	5 ～ 10	6 ～ 10	6 ～ 10	6 ～ 20	10 ～ 20	2 ～ 6	2 ～ 4	5 ～ 10	3	1 ～ 2	10 ～ 20	2 ～ 6	10 ～ 20	-	10 ～ 20	2	2 ～ 6	-	1	6 ～ 20	6 ～ 10	-	1 ～ 6	1 ～ 6	1 ～ 6	3	2 ～ 6	-	-	-	-	-	-	-
Table	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs.	Long 1 pc.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs.	Long 1 pc.	Long 1 pc. / Short 1 pcs	Long 2 pcs.	Long 2 pcs.	Long 1 pc. / Short 1 pcs	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc.	Long 1 pc. / Long 2 pcs.	-	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	-	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc.	Long 2 pcs.	-	-	-	-	-	-	-
Motor Mounting Orientation	Straight	Straight	Straight	Straight	Straight	Folded	Straight	Straight	Straight	Straight	Folded	Straight	Straight / Folded	-	Straight / Folded	Straight / Folded	Straight / Folded	Straight	Straight	Straight	-	Straight	Straight / Folded	-	Folded	-	Straight	-	-	Straight	-	-	-	Straight / Folded	Straight / Folded	-	Straight	-	-	-	-	-	-	-	-
Main Body, Peripheral Components	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Peripheral Components	Main Body	Main Body	Main Body	Peripheral Components	Main Body	Main Body	Main Body	Main Body	Main Body	Peripheral Components	Peripheral Components	Main Body	Peripheral Components	Peripheral Components	Peripheral Components	-
Cover	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Provided	Not Provided / Provided	-	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Provided	Not Provided	Provided	-	Not Provided	Not Provided / Provided	-	Provided	-	Not Provided	-	-	Not Provided / Provided	Not Provided / Provided	-	-	Not Provided / Provided	Not Provided / Provided	-	Provided	Not Provided / Provided	-	-	-	-	-	-	-
With or w/o Motors	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	-	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	-	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	-	-	-	-	-	-	-
Table Length L1(mm)	75	51	28.5 ～ 54	33	47	28.5 ～ 54	47.4	43.5 ～ 81	33.2	23	43.5 ～ 81	50	39.5 ～ 74.4	-	39.5 ～ 76	43.5 ～ 108	47.4 ～ 64	50	28 ～ 51	55	-	43 ～ 75	47.4 ～ 64.2	-	50	-	47	-	-	33.2	-	-	-	33.2 ～ 46	33.2 ～ 46	-	55	-	-	-	-	-	-	-	-
Grease	Standard	Standard	Standard / Low Particle Generation	Standard	Standard	Standard	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard	Standard	Standard / Low Particle Generation	Standard	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard	Standard	Standard	Standard	Standard	Standard / Low Particle Generation	Standard	Standard	Standard	Standard	Standard	-	Standard	Standard	Standard	-	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard	Standard	Standard	-	-	-	-	-	-	-
Ball Screw Shaft Dia.(Ø)	15	12	10	8	8	10	8	15	6	5	15	12	10	10	13	15	8	10	12	-	5	15	8	15	-	15	8	8	-	6	13	10	-	6	6	6	-	8	-	-	-	-	-	-	-
With or w/o Lubricant Unit	Not Provided	Not Provided	Not Provided / Provided	Not Provided	Not Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	-	Not Provided	-	-	-	-	-	-	-
Table Width W1(mm)	60 ～ 112	42 ～ 86	44.5 ～ 80	26 ～ 52	35 ～ 62	44.5 ～ 80	37.6 ～ 62	59.5 ～ 104	29.6 ～ 52	22 ～ 44	59.5 ～ 104	80	38 ～ 80	-	37.4 ～ 86	53 ～ 104	31 ～ 62	62	42	49	-	60	31 ～ 62	-	62	-	35	-	-	52	-	-	-	23 ～ 52	23 ～ 52	-	49	-	-	-	-	-	-	-	-
Amplifier Voltage	-	-	-	-	-	-	-	-	-	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	-	-	-	-	-
With or w/o Retainer	-	-	-	-	-	-	-	-	-	-	-	Not Provided	Not Provided	Provided	Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Provided	Not Provided	Provided	Provided	Not Provided	Provided	Not Provided	Provided	-	Provided	Provided	Provided	-	Provided	Not Provided	Provided	Not Provided	Provided	-	-	-	-	-	-	-

Loading...Tải…